| Fastening nut securing heat shield at the sides to body |
|
Tightening torque |
3.5 Nm (2.5 ftlb.) |
|
|
| Fastening screw securing bumper reinforcement to impact pipe |
|
Tightening torque |
85 Nm (63 ftlb.) |
|
|
| Upper edge of rear bumper to lower edge of rear lid |
Gap dimension -Y- |
Adjustment value |
166 mm |
|
|
| Upper edge of rear bumper to upper edge of rear retaining strip |
Gap dimension -X- |
Adjustment value |
168 mm |
|
|
| Heat shield for exhaust system and lower retaining strip |
Gap dimension -W- |
Adjustment value |
94 mm |
|
|
| Heat shield to lower retaining strip |
Projection dimension -Z- |
Adjustment value |
2 mm |
|
|