LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers -- CARRERA (997) >> WM 631537 Disassembling And Assembling Front Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Disassembling front apron >> Removing fixing clip for wire harness

Removing fixing clip for wire harness

  1. Insert a screwdriver between the front apron -2-  and fixing clip -1-  and remove fixing clip -1-  (-arrow-  ).
    Fig 1: Removing Fixing Clip For Wire Harness
    G09824742Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Check fixing clip -1-  and replace it if necessary.
scientia non olet · About LEMON Manuals