LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 5X - Body General - CARRERA (997 ) >> WM 5X00IN Work Sequence For Accident Repairs (All Models) >> Replacement

WM 5X00IN Work Sequence For Accident Repairs (All Models): Replacement

  1. Cover undamaged areas of the vehicle so that they are protected against fire
  2. Disconnect battery
  3. Pre-paint new parts from the inside
  4. Reshape damaged area by straightening so that adjacent contours or gap dimensions correspond to the standard condition
  5. Roughly cut out damaged areas
  6. Cut out remaining pieces
  7. Fit new parts in, then check the gap dimensions with the accessories fitted
  8. Protect spot-welded flanges against corrosion
  9. Observe safety and quality instructions for welding → 5000AW SAFETY INSTRUCTIONS
  10. Weld in new parts
  11. Grind visible weld seams flat; if necessary apply body solder or filler
scientia non olet · About LEMON Manuals