LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps -- CARRERA (997) >> WM 559037 Disassembling And Assembling Rear Lid (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Removing rubber cover

Removing rubber cover

  1. Pull rubber cover -1-  off the rear lid.
    Fig 1: Identifying Rubber Cover Off Rear Lid
    G09824135Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Loosen adhesive residue on the rear lid using a silicone remover and remove it.
scientia non olet · About LEMON Manuals