Removing spoiler lip

Heat the spoiler lip -1- with the hot-air blower v.a.g 1416 in the bonding area -A- .

Fig 1: Removing Spoiler Lip
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert a plastic wedge between the rear lid -2- and spoiler lip -1- and loosen the bonded joint -arrows- .
Remove adhesive residue -A- on the rear lid -1- using the film eraser Nr.174 Pos.1 and holder Nr.174 Pos.2 .

Fig 2: Removing/Cleaning Off Adhesive Residue
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clean off adhesive residue with isopropanol.
Information

Only when re-using the spoiler lip.
Remove adhesive residue on the spoiler lip using the film eraser Nr.174 Pos.1 and holder Nr.174 Pos.2 .

Fig 3: Removing/Cleaning Off Adhesive Residue
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clean off adhesive residue with isopropanol.