LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps -- CARRERA (997) >> WM 555719 Removing And Installing Release For Rear Lid (All Models) >> Installing release for rear lid

Installing release for rear lid

  1. Clip in switch for lid release with the locking tabs in the fastening ribs of the scuff plate -arrows-  so that they are felt to engage.
    Fig 1: Installing Lid Release Switch
    G09824080Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals