Technical Values

Location	Description	Type	Basic value	Tolerance 1
Front lid to front apron		Gap dimension A 4.5 mm	+/-1 mm
Front lid to front apron	Lid only lowered	Gap dimension B	2 mm
Main headlight to inner wing	Determine left and right gap	Gap dimension A	4.5 mm	+/-1 mm
Main headlight to front apron		Gap dimension A	4 mm	+/-1.5 mm
Main headlight to external wing		Gap dimension A	4 mm	+1 mm
Main headlight to external wing	Only lowered	Gap dimension B	1 mm
Main headlight to top wing		Gap dimension A	4 mm	+/-1 mm
Main headlight to top wing	Only lowered	Gap dimension B	1 mm
Front lid to wing		Gap dimension A	4 mm	+/-1 mm
Front lid to wing	Only lowered	Gap dimension B	0.5 mm
Wing to front lid	Determine left and right gap	Gap dimension A	4 mm	+1 mm
Wing to front lid	Only lowered	Gap dimension B	0.5 mm
Filler flap to wing	All the way round	Gap dimension A	3.5 mm	+/-0.5 mm
Front apron to side direction indicator		Gap dimension A	1.5 mm
Wing to side direction indicator		Gap dimension B	0.5 mm	+0.5 mm
Wing to outer side panel	Even transition from front to rear	Gap dimension A	4.5 mm	+/-1 mm
Door to wing		Gap dimension A	4 mm	+/-0.5 mm
Wing to outer side panel		Gap dimension A	4.5 mm	+/-1 mm
Wing to outer side panel	Only lowered	Gap dimension B	2 mm
Door to outer side panel		Gap dimension A	4.5 mm	+/-1 mm
Door to outer side panel	Doors only lowered	Gap dimension B	2 mm
Door to outer side panel	Doors only raised	Gap dimension A	4 mm	+/-0.8 mm
Sliding roof panel at front to outer roof panel	Only lowered at front	Gap dimension A	5 mm
Sliding roof panel at rear to outer roof panel	Only raised at rear	Gap dimension A	6 mm
Roof joint strip to outer roof panel		Gap dimension A	2 mm
Windscreen to windscreen frame	Only lowered	Gap dimension A	2 mm
Cowl panel frame to wing	Continuous transition	Gap dimension A	3 mm	+/-1 mm
Door window to side window	Door window lowered by max. 1 mm	Gap dimension A	7 mm	+/-1 mm