LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> 97 - Cables -- CARRERA (997) >> WM 976719 Removing And Installing Wire Harness For Rear Spoiler/Rear Lid (Gt3 & Gt3 RS) >> Removing Wire Harness For Rear Spoiler

Removing Wire Harness For Rear Spoiler

  1. Open the rear lid.
  2. Release the locking lug -1-  for the electric plug connection -arrow A-  and disconnect it -arrow B-  .
    Fig 1: Disconnecting Wire Harness At Rear Lid
    G09831503Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Open the wiring duct -arrow A-  and take out the line -arrow B-  .
    Fig 2: Loosening Line On Hinge For Rear Lid
    G09831504Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Unplug electric connector for engine-compartment scavenging blower
    Fig 3: Removing Electric Line At Engine-Compartment Scavenging Blower
    G09831505Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 4.1. Release the connector -arrow A-  and pull it off -arrow B-  .
    2. 4.2. Take the line out of the holder -arrow C-  .
  5. Unclip line from rear lid at two places.
  6. Pull wire harness out through the openings at the rear lid.