Installing Wiring Harness For Centre Console

Information 

The wire harness for center console spare parts scope means the scope for fully-equipped vehicles. Depending on the vehicle equipment, connectors not required are tied to the wire harness for center console using tie-wraps.

When doing this, ensure the lines are routed correctly so that no line becomes trapped or damaged.

1. Lay wiring harness with retaining clips in center console and push on retaining clips at the points provided.
   Fig 1: Pushing Retaining Clips In Center Console

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Push electric connectors onto equipment versions until they are felt to engage.