Completing The Vehicle

Fig 1: Engaging Left And Right Support

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 1.1. Position the support and engage in lower side member.
2. 1.2. Press in the locating peg -1-  of the support and check it is seated correctly.
   Fig 2: Securing Support

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. 1.3. Tighten the fastening nut -3-  and fastening screws -2-  . → Tightening torque: 7.2 Nm (5.5 ft. lb.) 

Information 

Ensure that belt strap can run properly!

Fig 3: Installing Seat Belt

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 3.1. Tighten fastening screw -2-  , seat belt with fitting -3-  and spacer sleeve -4-  on inner lower side member. → Tightening torque: 50 Nm (37 ft. lb.) 
2. 3.2. Press in -1-  cap.