LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 74 - Seat UPHOLSTERIES, Cover -- CARRERA (997) >> WM 741919 Removing And Installing Cover For Front Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Subsequent Work >> Removing Creases In Seat Cover (Leather)

Removing Creases In Seat Cover (Leather)

NOTE: Risk of damage to cover if excessive heat is applied.
  • Creases in cover

→ If creases have formed, only short partial warming with the hot-air gun is permissible.

→ The hot-air temperature of 50 °C must always be observed.

  1. If creases have formed, partially heat the affected areas of the cover with the hot-air gun and smooth out the cover using the special tool.

    Wetting-off iron 9747 

    Knurling iron 9747/1 

    Bone burnisher 9747/2 

    Hot-air gun v.a.g 1416 

scientia non olet · About LEMON Manuals