LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 74 - Seat UPHOLSTERIES, Cover -- CARRERA (997) >> WM 741719 Removing And Installing Padding For Front Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Installing Padding For Front Backrest >> Checking Seat Following Removal

Checking Seat Following Removal

  1. Connect the removed seat to the vehicle's wiring harness via test cable 9745  and test cable 9745/1  .
  2. Connect electric plug to control module trim panel. → INSTALLING CONTROL MODULE TRIM PANEL
  3. Connect the battery. → 2706IN IN -WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY
  4. Switch on ignition.
  5. Carry out a function check on the seat components.
  6. Switch off ignition after function test and disconnect battery.
  7. Disconnect test cable 9745  and test cable 9745/1  .
scientia non olet · About LEMON Manuals