LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 72 - Seat Frames -- CARRERA (997) >> WM 723419 Removing And Installing Lumbar Support (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Installing Lumbar Support >> Checking Seat Following Removal

Checking Seat Following Removal

  1. Connect the removed seat to the vehicle's wiring harness via test cable 9745  and test cable 9745/1  .
  2. Connect electric plug to control module trim panel. → Installing Control Module Trim Panel 
  3. Connect the battery. → 2706IN IN -WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY
  4. Switch on ignition.
  5. Carry out a function check on the seat components.
  6. Switch off ignition after function test and disconnect battery.
  7. Disconnect test cable 9745  and test cable 9745/1  .
scientia non olet · About LEMON Manuals