Removing footwell light

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

Fig 1: Identifying Footwell Light

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. E  - Footwell light

1. Press footwell light carefully out of the trim panel at the cut-out -arrow-  using a screwdriver.
   Fig 2: Removing Footwell Light

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Release connector on footwell light -arrows a-  and pull it off.
3. Remove footwell light.