LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> 70 - Linings, Insulation -- CARRERA (997) >> WM 708019 Removing And Installing Roof Rail Trim (TARGA 4 & TARGA 4S) >> Removing Roof Rail Trim >> Releasing Rear Belt Cover

Releasing Rear Belt Cover

  1. Insert a small screwdriver sideways into the cover -1-  and remove the cover.
    Fig 1: Releasing Rear Belt Cover
    G09829325Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screws -2 and 3-  .
  3. Pull rear belt cover -4-  forward in direction of travel, pull connector off the interior light -5-  and set rear belt cover -4-  aside.
scientia non olet · About LEMON Manuals