LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> 68 - Interior Equipment -- CARRERA (997) >> WM 683019 Removing And Installing Cup Holder (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Installing Cup Holder

Installing Cup Holder

  1. Push cup holder -1-  into the shaft of the glove compartment.
  2. Tighten fastening screws M5 x 30 -2-  . Tightening torque → final tightening: 7.0 ftlb. 
    3. Fig 1: Installing Cup Holder
    G09827209Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals