LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> 68 - Interior Equipment -- CARRERA (997) >> WM 681519 Removing And Installing Glove Compartment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Installing Glove Compartment

Installing Glove Compartment

Fig 1: Identifying Glove Compartment Installation Position
G09827138Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Swivel in glove compartment -1-  at the bottom until the electrical plug connection -2-  can be connected.
    Fig 2: Locking Plug Connection
    G09827139Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Plug in electrical plug connection -2-  (-arrow-  ).
  3. Swivel glove compartment -1-  into the instrument panel -arrow-  and secure with the top fastening screws -2-  . Tightening torque → Final tightening: 2 ftlb. 
    Fig 3: Installing Glove Compartment
    G09827140Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Screw right fastening screws -2-  into the glove compartment -1-  . Tightening torque → Final tightening: 2 ftlb. 
    Fig 4: Securing Glove Compartment
    G09827141Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Attach electrical wire to glove compartment -arrow-  .
  6. Screw left fastening screws -2-  into the glove compartment -1-  . Tightening torque → Final tightening: 2 ftlb. 
    Fig 5: Securing Glove Compartment (Left)
    G09827142Courtesy of PORSCHE CARS NORTH AMERICA, INC.