Removing Auxiliary Brake Light
- Remove the left air guide.
- 1.1. Unscrew the screw-in pin -1- and remove the clip -2- (-Arrow A- ).
- 1.2. Fold the air guide down -Arrow B- and remove it -Arrow C- .
- Release the left side of the auxiliary brake light using a long screwdriver -Arrow A-
and remove it carefully by pressing it backwards -Arrow B-
.
Information
The auxiliary brake light lens juts out over the light housing and can break at the ends if the removal procedure described here is not followed!
- Remove auxiliary brake light.
- 3.1. Press the auxiliary brake light as far as it will go to the right -Arrow A- and pull out the left side -Arrow B- until the connector no longer reaches into the opening.
- 3.2. Carefully remove the auxiliary brake light by moving it to the left -Arrow C- .
- Release the connector -Arrow A- and pull it off -Arrow B- .