Installing High Beam Halogen Bulb

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

1. Replace faulty lamp. Ensure that the lamp is seated correctly when doing so.
2. Engage retaining bow -3-  .
   Fig 1: Engaging Retaining Bow

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Connect electric connector -2-  . Check that it is seated securely.
   Fig 2: Plugging In Connector

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Fit the side lid -1-  and close it (observe markings indicating direction to turn).
   Fig 3: Closing Lid

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.