Installing Halogen Bulb (High Beam)

→ When installed, the headlight has a high voltage.

→ Only bulbs specified in the bulb table may be used!

→ Bulbs with a higher wattage may damage the bulb housing!

→ To prevent short circuits, the load in question must be switched off when changing bulbs!

→ New bulbs must be clean and free of grease. Therefore, never touch bulbs with your bare hands! To change the bulbs, use a cloth or soft paper.

→ Observe the safety instructions when replacing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

1. Connect electric connector to the halogen bulb until it engages securely.
   Fig 1: Connecting Electric Plug

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Slide halogen bulb into the headlight and lock it with the bayonet lock.
   Fig 2: Installing Halogen Bulb

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.