Removing Gas-Discharge Control Unit

Unscrew the two fastening screws for the coil -2- and the cable holder -1- and pull out the coil.

Fig 1: Removing Fastening Screws And Pulling Out Coil
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press terminal for gas-discharge headlight cable apart and pull out the cable.

Fig 2: Pulling Out Gas-Discharge Headlight Cable
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew the fastening screw for the control unit -3- and remove the control unit.

Fig 3: Removing Fastening Screw For Control Unit
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Carefully release and lever out the electric connector -4- on the control unit using a screwdriver.

Fig 4: Releasing Electric Connector Using Screwdriver
Courtesy of PORSCHE CARS NORTH AMERICA, INC.