Installing Headlight Mount

Information 

The main headlights are fitted into the body at the factory.

A new adjustment may only be made in the case of accident repairs or replacement of the main headlights.

The headlight mount is secured to the body by 3 knurled nuts.

1. Push the mount into the body and screw down with three knurled nuts. → Tightening torque: 6 ftlb.+/-1.5 ftlb. 
   Fig 1: Adjusting Element

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Check that the gaps match the specified gap dimensions → DIAGRAM - BODY FRONT GAP DIMENSIONS  . Adjust the headlight mount if necessary. → Installing Headlight Mount