Installing Roll-Over Bar

Fit roll-over bar into the vehicle -arrows- .

Fig 1: Fitting Roll-Over Bar Into Vehicle
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Screw in fastening nuts at the rear left and right -1- (-arrows- ). → Tightening torque: 23 Nm (17 ftlb.) +/-2 Nm (+/-1.5 ftlb.)

Fig 2: Screwing Fastening Nuts At Rear Left And Right
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Screw in fastening nuts at the front left and right -1- (-arrows- ). → Tightening torque: 23 Nm (17 ftlb.) +/-2 Nm (+/-1.5 ftlb.)

Fig 3: Screwing Fastening Nuts At Front Left And Right
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Connect electric plug connection -1- (-arrows- ).

Fig 4: Connecting Electric Plug Connection
Courtesy of PORSCHE CARS NORTH AMERICA, INC.