Installing Hood Compartment Lid: Notes

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

Position hood compartment lid on the hinges and screw down slightly with the fastening nuts -1- (-arrow-) . Adjust the hood compartment lid to the contours of the side panel and rear lid and screw down the fastening nuts. → WM 5X00IN DIAGRAM - BODY GAP DIMENSIONS (ALL MODELS) → Tightening torque: 9.7 Nm (7.5 ftlb.)

Fig 1: Installing Hood Compartment Lid
Courtesy of PORSCHE CARS NORTH AMERICA, INC.