LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2010 >> Cayman Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 612855 Replacing Convertible-Top Covering (BOXSTER SPYDER) >> Assembling Convertible-Top Covering >> Installing Tensioning Element

Installing Tensioning Element

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position spiral spring -5-  with the spring plate -6-  on the fabric cover -4- (-arrow A-)  and fold over the fabric cover -arrow B-  .
  2. Position the hood covering -3-  on the fabric cover in such a way -arrow C-  that the holes are aligned with the bores in the spring plate.
  3. Position the tensioning element -2-  and secure with the fastening screws -1- (-arrow D-)  .
    4. Fig 1: Installing Tensioning Element
    G09590234Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Fold the tensioning element -1-  over by 90° -arrow A-  .
  5. Fold over the Velcro fastener -2-  on the fabric cover -3- (-arrows B-)  and press it on -arrow C-  .
    6. Fig 2: Securing Velcro Fastener
    G09590235Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals