LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2010 >> Cayman Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 612319 Removing And Installing Rear Seal (Tension Bow) (Except CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, BOXSTER SPYDER, CAYMAN R) >> Removing Rear Seal (Tension Bow)

Removing Rear Seal (Tension Bow)

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Rear Seal (Tension Bow)
G09590322Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Pull headliner -1-  out of the groove of the tension bow -2-  .
    Fig 2: Removing Rear Seal
    G09590323Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals