Technical Values
WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Gap from hardtop to windscreen frame | Adjustment dimension | 5.5 mm | +/-1.0 mm | ||
| Offset from hardtop to cowl panel | Hardtop only lowered | Check dimension | 2 mm | +/-1.0 mm | |
| Hardtop to side panel | on the left and right of the vehicle | Adjustment dimension | 5.5 mm | +/-3.5 mm | |
| Hardtop to convertible top compartment lid | on the left and right of the vehicle | Adjustment dimension | 5.5 mm | +/-3.5 mm | |
| Mounting plate for hardtop | Tightening torque | 10 Nm (7.5 ftlb.) |