Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Clutch pressure plate | to double-mass flywheel | Initial tightening | 20 Nm (15 ftlb.) | ||
| Clutch pressure plate | to double-mass flywheel | Final tightening | 90° | ||
| Clutch tightening sequence | |||||
| Clutch pressure plate | to double-mass flywheel | Initial tightening | 20 Nm (15 ftlb.) | ||
| Clutch pressure plate | to double-mass flywheel | Final tightening | 90° | ||