Tightening Torques
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Clutch slave cylinder to transmission |
Thread M8 x 25 |
Tightening torque |
17 ftlb. |
+/-1.5 ftlb. |
|
| Clutch slave cylinder to bleeder valve |
Thread M12 x 1 |
Tightening torque |
3.5 ftlb. |
+/-0.5 ftlb. |
|