Preliminary Work
WARNING: This page is about a different variant/trim than selected.
Information
The clutch master cylinder is installed under the brake booster, accessible from the plenum panel in the engine compartment.
- Disconnect the battery → Connecting And Disconnecting Battery .
- Open bonnet and position it with the bonnet stay 9704 → WM 664419 REMOVING AND INSTALLING COWL PANEL COVER .
- Remove engine design cover → 700219 REMOVING AND INSTALLING FRONT COVER (ENGINE COMPARTMENT) .
- Remove cowl panel cover → WM 664419 REMOVING AND INSTALLING COWL PANEL COVER .
- Remove left plenum panel partition.
- Partly remove fuse carrier, including six connectors, on the left in the plenum panel and lay to one side -arrow- .