Removing Top Section Of Gearshift Bracket

WARNING: This page is about a different variant/trim than selected.

Remove centre console trim panel.
Remove foam mat.

Fig 1: Identifying Foam Mat
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Lock gearshift lever in neutral position using special tool locking bridge 9619 -arrow- .

Fig 2: Locating Gearshift Lever
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove transverse strut on centre console -arrows- .

Fig 3: Locating Transverse Strut For Centre Console
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
NOTE:
Incorrect handling of fastening part
- Tab on fastening part can break off
→ Only bend fastening part as far as the release.
Pull shift and selector cable off gearshift bracket. To do this, release the fastening parts using a screwdriver -arrows- .

Fig 4: Removing Shift And Selector Cables
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove special tool locking bridge 9619.
Unscrew fastening screws -arrows- on top section of gearshift bracket.

Fig 5: Locating Gearshift Bracket Fastening Screws
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove top section of gearshift bracket.