LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2010 >> Cayenne S Transsyberia, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> 4X - Chassis - General >> WM 4X00IN Cayenne System Overview (All Models) >> Information >> General

WM 4X00IN Cayenne System Overview (All Models): Information: General

The development team is expected to meet various requirements in developing the Cayenne, e.g. sporty vehicle handling, tough off-road mission and full suitability for everyday use with maximum driving safety. Through overall vehicle fine-tuning of the individual systems, such as axles, steering, tyres, aerodynamics and drive design, very good vehicle handling features were implemented in both on-road and off-road operations with the following technical specifications:

System Explanation
PSM (Porsche Stability Management) ABS Anti-lock Brake System
ABD Automatic Brake Differential
ASR Anti-slip control
EBD Electronic Brake Distributor
MSR Engine drag torque control
FDR Driving dynamics control
PTM (Porsche Traction Management) Permanent four-wheel drive 38/62 %
Electronically regulated longitudinal lock
Reduction gear
PTM Plus In addition to the PTM specifications: Electronically regulated rear axle block
Air springs with level adjustment and vertical adjustment Full-supporting air-spring struts with integrated shock absorbers Air supply consisting of accumulators and sensors
PASM (Porsche Active Suspension Management) Air suspension
Vibration damper with situation-dependent and continuous shock-absorption regulation with three codes (Comfort, Normal, Sport)
ORS (Off-Road Stabiliser system) up to model year 2006 Enables a greater restriction of the axles when driving off-road
PDCC (Porsche Dynamic Chassis Control) as of model year 2008 Active chassis. The total system consists of chassis components designed to stabilise the vehicle body.