WM 408537 Disassembling And Assembling Front Spring Strut (Steel Springs) (All Models): Tools

Designation	Type	Number	Description
socket wrench insert	VW tool	3353	For loosening lock nuts on the damper.
arm bracket	Special tool	9630	For countering the damper piston rods.
spring clamp for spring struts	Commercially available tool	Nr.121	Commercially available. Clamping range of spring holder up to 150 mm spring diameter (size 1A).
double-arm torque wrench 15 - 65 Nm (48 ftlb.)	Commercially available tool	Nr.93	Commercially available torque wrench for tightening torques of 60 Nm (44 ftlb.) ± 5 Nm (3.5 ftlb.). Tighten