After Triggering The Seat-Belt Pretensioners

After triggering of a seat-belt pretensioner, driver, passenger and/or rear unit.

After triggering of one or more airbag units (driver, passenger, head and/or side airbag).

• All seat-belt pretensioner units

Information 

• Because it is difficult to visually determine if one or more belt tensioners has been triggered, check the following points. 

Read out the airbag fault memory using the Porsche System Tester.

Check plug connection on the seat-belt pretensioner for damage.

Pull out the belt strap as far as possible and check for wear.

Perform a function test on the automatic belt device.