Installing Side Guide Rail
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Install side guide rail.
- 1.1. Engage expander nuts -4-
(-arrow A-
).
- 1.2. Position side guide rail -1-
(-arrow B-
) and fit it with the top side flush with the contour of the wing.
- 1.3. Screw in fastening screws -2 and 3-
and tighten to the specified torque → Tightening torque: 2.5 Nm (2.0 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.) → Tightening torque: 1.5 Nm (1.0 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.