Installing Front Guide Rail
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Install front guide rail.
- 1.1. Insert front guide rail -2-
from below -arrow A-
and swivel it in behind the side guide rail -arrow B-
.
- 1.2. Press front guide rail -2-
into the headlight mounting -3-
from below -arrows C-
.
- 1.3. Screw in and tighten fastening screws -1-
. → Tightening torque: 1.5 Nm (1.0 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Adjust front guide rail.
- 2.1. Adjust gap dimension -X-
from inner guide rail to lower edge of main headlight. → Gap dimension X: 23.0 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 2.2. Adjust gap dimension -Y-
from outer guide rail to lower edge of main headlight. → Gap dimension Y: 24.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC.