Installing Centre Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Position centre cover -2-
on the body -arrows A-
, guide it in at the front under the wheel housing liner -3-
and slide it forward -arrow B-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Tighten fastening screws -1-
. → Tightening torque: 2 Nm (1.5 ftlb.)
- Slide cover -1-
into the centre cover -2-
(-arrow A-
) and clip it in by pushing it upwards -arrow B-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Position rear lifting platform holder -2-
on the body -arrow-
and secure with the fastening screw -1-
. → Tightening torque: 9 Nm (6.5 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.
)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.