Preparing Connection Area Of Body For Installing Lower Side Member Reinforcement

Clean welding and sealing areas.
1. 1.1. Clean the body connection flange of undersealing and paint in the marked areas using a hot-air gun or rotary brush. Grind the connection flange until bare.
  
  Fig 1: Identifying Welding And Sealing Areas Of Lower Side Member Reinforcement (Front)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 2: Identifying Welding And Sealing Areas Of Lower Side Member Reinforcement (Front)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 3: Identifying Welding And Sealing Areas Of Lower Side Member Reinforcement (Center)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 4: Identifying Welding And Sealing Areas Of Lower Side Member Reinforcement (Center)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 5: Identifying Welding And Sealing Areas Of Lower Side Member Reinforcement (Rear)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 6: Identifying Welding And Sealing Areas Of Lower Side Member Reinforcement (Rear)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.