LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2010 >> Cayenne S Transsyberia, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 51 - Body Center, Roof, Frame - Cayenne >> WM 514155 Replacing B-Pillar (All Models) >> Preliminary Work For Body Repairs With Straightening Bench

Preliminary Work For Body Repairs With Straightening Bench

  1. Remove accessories in the repair area.
    1. 1.1. Remove accessories in the repair area according to the extent of damage to the vehicle.
  2. Set up straightening bench with straightening set.
    1. 2.1. Equip straightening bench with the basic straightening attachments according to the plans included with the straightening attachments.
    2. 2.2. When fitting the B-pillar with reinforcement using the straightening bench, the side portal can also be used.
  3. Set vehicle on straightening bench.

    Information 

    • As a result of the joint which seals the side member, the vehicle must not be secured to the straightening bench with quick-acting claws. 
    1. 3.1. Position vehicle on straightening bench, align according to the reference holes and firmly bolt to the straightening set.
  4. Cover the accessories adjacent to the area of the vehicle requiring repair.
    1. 4.1. Cover all accessories remaining on the vehicle and the adjacent areas with fire-proof, protective covers.
  5. Reshape connection area of the sheetmetal parts to be replaced.
  6. Expose welding areas.
    1. 6.1. Remove undersealing, paint, etc. from the welding areas of the body with a hot-air gun or rotary brush.
scientia non olet · About LEMON Manuals