LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2010 >> Boxster Base, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN >> WM 429119 Removing And Installing Connecting Link (Suspension/Stabilizer) (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Removing Rear Connecting Link (Suspension/Stabilizer)

Removing Rear Connecting Link (Suspension/Stabilizer)

  1. Remove wheel → REMOVING WHEEL . Then loosen the lock nuts -Arrows-  on the suspension/stabilizer. Counter with a Torx T30 or open-ended wrench when loosing the nuts.
    Fig 1: Locating Connecting Link (Suspension/Stabilizer)
    G09587654Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Support wheel suspension at the wheel carrier with a suitable jack and remove suspension/stabilizer.
scientia non olet · About LEMON Manuals