LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2010 >> Boxster Base, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers -- 987-BOXSTER-CAYMAN >> WM 635519 Removing And Installing Rear Apron (All Models) >> Subsequent Work

Subsequent Work

  1. After fitting the rear apron, check that the heat shields are fitted correctly, and adjust them if necessary. → Correct Assembly Of Heat Protection Panels 
  2. Check rear gap dimensions and make adjustments if necessary. → WM 5X00IN DIAGRAM - BODY GAP DIMENSIONS (ALL MODELS)

    Information 

    • Only for vehicles without I-no. XAM. 
  3. Install rear spoiler. → INSTALLING TAIL LIGHT
  4. Install tail light on right and left. → INSTALLING TAIL LIGHT


  1. After fitting the rear apron, check that the heat shields are fitted correctly, and adjust them if necessary. → Correct Assembly Of Heat Protection Panels 
  2. Check rear gap dimensions and make adjustments if necessary. → WM 5X00IN DIAGRAM - BODY GAP DIMENSIONS (ALL MODELS)

    Information 

    • Only for vehicles without I-no. XAM. 
  3. Install rear spoiler. → INSTALLING REAR SPOILER
  4. Install tail light on right and left. → INSTALLING TAIL LIGHT
scientia non olet · About LEMON Manuals