LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Cayman Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 - Engine - Crankcase, Suspension -- 987-BOXSTER-CAYMAN >> WM 105219 Removing And Installing Crankcase Vent Line (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition, CAYMAN R) >> Installing Crankcase Vent Line

Installing Crankcase Vent Line

  1. Replace the two O-rings on the rapid-action couplings. Apply a thin coat of Optimol MP3 grease to the O-rings.
  2. Position line in the engine compartment.
  3. Attach rapid-action couplings to the cylinder heads -arrow-  .
    Fig 1: Locating Rapid-Action Coupling On Vent Line
    G09585099Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Fig 2: Locating Rapid-Action Coupling (Cylinders 1 - 3)
    G09585100Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Fit and tighten Torx screw (M6 x 12) to secure holding clamp on vent line -arrow-  . → Tightening torque: 7.5 ftlb. 
    Fig 3: Locating Holding Clamp Screw
    G09585101Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Clip in all line clips.
scientia non olet · About LEMON Manuals