Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Stud for engine carrier in body | M10 x 84 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Engine carrier with oil pump to crankcase | Internal Torx countersunk screw, M6 x 110 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Engine carrier to crankcase | M10 x 120 and M10 x 80 | Tightening torque | 46 Nm (34 ftlb.) | ||
| Engine carrier to body | Collar nut, M10 - replace if necessary | Tightening torque | 65 Nm (48 ftlb.) |