Installing Cover Plate For Exhaust Manifold

Information 

Specifications for wrench sizes (a/f specifications) for screw heads are described as follows:

• Torx screws: (E..) for external Torx  , (T..) for internal Torx  .
• Hexagon-head bolts (internal and external hexagon): Wrench size (a/f) 

1. Position cover plate holder -1-  on the cover plate (lower part) and secure with four external Torx screws (E10, M6 x 12) -2-  .
   Fig 1: Identifying Cover Plate And Screws

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 1.1. Tighten the screws.

   → Tightening torque: 10 Nm (7.5 ftlb.)