Fastening Tank Filler Neck

Fig 1: Fender Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

• The following points apply only to the right fender. 

1. Install angled pipe -8-  . Press in the plastic clip -9-  until the locking tabs -B-  engage audibly.
2. Tighten fastening screw -6-  on tank filler neck -7-  . Tightening torque → Tightening torque: 7.5 ftlb. 
3. Press in the locking tabs -A-  of the sleeve -5-  until they engage audibly.
Fig 2: Fastening Tank Filler Neck
Courtesy of PORSCHE CARS NORTH AMERICA, INC.