Adjusting Rear Axle Camber

Information 

• Due to the restricted space, to tighten the lock nut of the left camber eccentric, use a 3/8 inch torque wrench (covering the range of 100 Nm (74 ft.lb.)) together with a 18 mm socket-wrench insert  .
• 3/8 inch torque wrenches and 3/8 inch socket-wrench inserts have a smaller height than tools of the same size in a 1/2 inch version  .

After loosening the lock nut, turn the eccentric -B-  as required. After adjusting, tighten the lock nut of the eccentric to the prescribed tightening torque.

→ Tightening torques for rear axle

Fig 1: Identifying Toe And Camber Eccentrics

Courtesy of PORSCHE CARS NORTH AMERICA, INC.