Adjusting Stop For Convertible Top Compartment Lid

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Stop For Convertible Top Compartment Lid

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Adjust stop 1 for the convertible top compartment lid to match the contour of the side panel. The stops 1 come in variants +1 mm to +5 mm as spare parts.

Fit stop 1 on the sheetmetal bracket 2 in the water channel of the side panel. Adjust in accordance with joining plan.
→ WM 5X00IN DIAGRAM - BODY GAP DIMENSIONS (ALL MODELS)

Fig 2: Installing Stop For Convertible Top Compartment Lid
Courtesy of PORSCHE CARS NORTH AMERICA, INC.