LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Cayman Base, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 616419 Removing And Installing Microswitch For Roof (Except CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R) >> Installing Microswitch For Roof

Installing Microswitch For Roof

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert microswitch for roof -1-  from above -arrow A-  into the front lock -2-  .

    Information 

    New circlips must always be used when securing the microswitch.

  2. Fit circlips -3-  from above -arrow B-  and press in until they connect fully with the microswitch for roof -1-  .
    3. Fig 1: Installing Microswitch
    G09590468Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals