LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Cayman Base, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 613055 Replacing Hood Frame (BOXSTER, BOXSTER S, BOXSTER S, BOXSTER S LIM. Ed. "Orange", BOXSTER S "RS 60 SPYDER", BOXSTER "Sport Edition", BOXSTER S "Sport Edition", BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition) >> Assembling Hood Frame >> Installing B-Pillar Seal

Installing B-Pillar Seal

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place seal -1-  on B-pillar -2- (-arrows A-)  and position it correctly.
  2. Pull seal receiver -3-  in at the bore -4-  on the B-pillar -arrow B-  .
  3. Screw down B-pillar seal on the door window aperture with the five fastening screws -5-  .
  4. Screw down B-pillar seal at the bottom of the B-pillar with the two fastening screws -6- (assembly tool with T15 insert 9744)  .
    5. Fig 1: Installing B-Pillar Seal
    G09590408Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals