LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Cayman Base, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 612855 Replacing Hood Covering (Except CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, BOXSTER SPYDER, CAYMAN R) >> Installing Hood Covering >> Fastening Hood Covering On The Tension Bow

Fastening Hood Covering On The Tension Bow

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Hood Covering
G09590375Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position hood covering -1-  , with the Centre coinciding with the marking on the tension bow -inset-  , in the groove of the tension bow -3-  . Use a plastic wedge -4-  to press in from the Centre outwards.
  2. After pressing the hood covering -1-  into the tension bow -3-  , check the Centre position once more and correct if necessary.
    3. Fig 2: Fastening Hood Covering On Tension Bow
    G09590376Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals